Impact driver cordless DAEWOO DAX 3521Li

21 W

Power

220 Nm

Max. torque

6,35 (1\4" hex)

Chuck type

Number of speeds

All Technical Data

Warranty

79 €

Where to buy

Find a service

Compare(0)

21V Li-Ion battery

LED lighting

Reverse

Features

21V Li-ion unified platform

The Model is compatible with all battery tools and batteries of the DAEWOO 21V line.

Brushless motor

The brushless motor delivers high power with lower energy consumption, allowing up to 50% longer runtime on a single battery charge.

Torque 220 Nm

Maximum torque of 220 Nm enables the screwdriver to handle various tasks, even the most challenging ones.

Quick-release 1/4" metal chuck

Provides quick installation of accessories and secure fixation during operation.The hexagonal chuck with 1/4" HEX fitting allows using the tool with any accessory that has this type of shank.

Electric Control Panel

The control panel located at the bottom of the device allows selecting preset torque settings and automatic operating modes.

Torque adjustment

The screwdriver is equipped with 4 preset torque modes:

«1» - 20 Nm
«2» - 30 Nm
«3» - 80 Nm
«4» - 220 Nm

Switching between these modes is done via the «Nm» button on the control panel.

Intelligent operating modes

The screwdriver features 4 intelligent operating modes:

«A» - Full-speed tightening. Full-speed loosening with automatic stop when fastener is fully unscrewed.

«W» - Minimum speed rotation at start-up followed by automatic increase upon load detection.

«T1» - Maximum speed rotation initially, then automatically stops when load increases. Stopping duration varies based on fastener and material.

«T2» - Starts rotating at maximum speed, then automatically slows down as load increases

Quick mode switching button

Allows quick switching between torque settings. Additionally, it can be used to quickly switch between normal mode and one of the saved intelligent operating modes. If necessary, the quick access button can be disabled.

Ring-shaped LED lighting

Provides bright illumination of the working area. 3 brightness levels and an option to turn off allow convenient use or deactivation of the light.The "flashlight" mode allows using the lighting without turning on the screwdriver.

Metal clip

Enables secure attachment of the screwdriver to the belt of a worker during operations.

Technical Data

Power

21 W

Capacity

- Ah

Battery type

Li-Ion

Engine

Brushless

Number of speeds

Max. torque

220 Nm

Torque settings

20/30/80/220

Idling speed

0-3600 rpm

Impact rate

0-3800 bpm

Chuck type

6,35 (1\4" hex)

Forward and reverse rotation

yes

Weight netto

1,6 kg

Dimensions

377х143х252 mm

Brushless motor
Quick-release chuck
LED lighting
High torque of 220 Nm
4 speed and torque modes
Compact design
Ergonomic rubberized grip
4 operation modes
Overcharge and overheating protection
Overload and short circuit protection

Where to buy

Support

Find a service