The vacuum cleaner easily copes with dust of moderate severity, for example, concrete, hardwood, ceramics, nickel, manganese, copper wire, silicates, tin and others.
Innovative filter cleaning system
It is activated by simply pressing a button on the control panel and restores up to 90% of the original filter performance.
Cleaning includes 2 stages: Shaking the HEPA+ filter and then cleaning it with an inward airflow.
Tank fill indicator
The indicator is triggered when it is necessary to clean or replace the dust collector. Working with a filled bag reduces the intensity of suction and reduces the quality of cleaning.
Power tool socket
The built-in socket allows you to connect a power tool up to 2000 watts. The vacuum cleaner automatically turns on when the tool is running and turns off with a delay after stopping to remove dirt from the hose.
Impact-resistant Tank
The tank capacity is 25 liters. The body wall is made of 3 mm thick impact-resistant plastic resistant to mechanical stress and corrosion.
Water collection function
The water suction and pumping function allows you to efficiently collect liquid up to 18 liters from any surface. The automatic suction stop system prevents liquid from entering the engine.
Drain drain hole
The hole is located at the bottom of the tank and makes it easier to drain the collected liquid without having to lift or turn over the vacuum cleaner.
Blowing mode
The blowing function allows you to clean the workplace from sawdust and shavings, blow leaves off paths, clean a drain or sewer.
Enlarged hose
A 4 m long hose allows you to collect construction debris at a height, without lifting the vacuum cleaner.
Technical Data
Power
1200 W
Capacity
25 l
Vacuum
175/17.5 mbar/kPa
Flow rate
23 l/sec
Suction hose length
4 m
Suction hose diameter
32 mm
Cable length
5 m
Noise Level
85
Gross weight
9,2 kg
Dimensions
420х375х620 mm
The DAEWOO wet and dry vacuum cleaner is designed for cleaning rooms, as well as for use (with
synchronous activation) with power tools for the forced removal of sawdust, planing, milling products, etc.